← Back to blog

How to Remove Pilling From a Hoodie Without Damaging It

November 20, 2026
How to Remove Pilling From a Hoodie Without Damaging It

The safest way to remove pilling from a hoodie is to lay it flat, pull the fabric taut and glide a fabric shaver over the pills with light pressure. A lint roller handles the loose fuzz first, and a disposable razor or small scissors work when you go slowly. Pilling is a normal result of friction, so a pilled hoodie is not ruined. Done right, the fix takes about ten minutes and the hoodie looks sharp again.

This guide covers why hoodies pill, which tool fits which fabric, the exact steps, and the wash habits that keep the fuzz from coming back. It is written for people who live in their hoodies and want them to keep looking intentional.

Kennywadesworld
Find a Hoodie for Your Everyday Style
Explore Kenny Wade’s casual wear, where comfort and personal style come together for different occasions.
Visit

TL;DR

  • Pills are small balls of loosened fibers. Friction makes them, and shaving them off cleanly fixes the look.
  • Start with a lint roller for loose fuzz, then use a fabric shaver on thick cotton, fleece and blends, with the hoodie flat and taut.
  • Use light pressure and keep moving. Lingering in one spot or pressing hard can cause more pilling.
  • Use a fabric shaver on a given garment only once or twice a year.
  • Prevent new pills by washing inside out on a gentle cycle and skipping the dryer when you can.

Table of Contents

Why hoodies pill in the first place

A hoodie takes more rubbing than almost anything else in your closet. The inside of the arms rubs your sides, the cuffs drag across desks and phones, the front pouch gets a constant workout, and a backpack strap grinds on the shoulders. That friction pulls short loose fibers to the surface, where they tangle into little balls. The balls stay attached because longer, stronger fibers anchor them to the fabric.

Fiber type matters. A textile testing explainer on the ASTM D4970 pilling method notes that synthetic fibers tend to pill more than natural ones, because their longer, stronger strands hold the pills in place. That is why polyester blends and fleece-lined hoodies can pill in the high-contact spots even when they feel soft and look great.

Washing adds to it. A heavy load, a rough cycle or a hot dryer all rub fibers against each other. Harsh cleaners and bleach also weaken fibers so they break and pill more readily, according to The Spruce.

Why hoodies pill in the first place

Does pilling mean the hoodie is low quality?

Not by itself. Pilling shows up on soft, comfortable fabrics of every kind, and where it appears says as much about how you wear and wash the hoodie as about how it was made. Cuffs, underarms and the sides of the torso pill first on nearly every hoodie. If you are shopping, our guide to stitch quality versus fabric weight in hoodies shows what to look at beyond a number on a tag.

Pick the right tool for your hoodie

Most hoodies are thick cotton, cotton-poly blends or fleece-lined knits. Those handle several removal tools well. The table sums up how each one works, based on guidance from Maytag's pilling guide, Vogue and The Spruce.

ToolBest forSpeedRisk to fabric
Lint roller or packing tapeLoose fuzz and small, light pillsFastVery low, but it will not lift pills that are firmly attached
Battery-powered fabric shaverThick cotton, fleece, blendsFastLow with light pressure, higher if you press or linger
Disposable or safety razorSturdy fabrics such as cotton or fleeceMediumMedium: a slip can nick the fabric
Small sharp scissorsA few stubborn pillsSlowMedium: you can snip a loop of yarn if you cut too deep
Sweater stone or fabric combDelicate knits, slow careful workSlowLow
Soft toothbrushFuzzy knits and fleeceSlowVery low

The Spruce ranks a battery-powered fabric shaver as the most effective way to remove pills, with scissors or a safety razor as careful alternatives and a lint roller for small pills. For a standard cotton or fleece hoodie, that is the order to follow.

How to remove pilling with a fabric shaver

A fabric shaver is a small handheld device with a protective guard over a spinning blade. It trims pills without grabbing the fabric underneath. The Spruce's removal guide and Vogue both describe the same basic routine.

  1. Start with a lint roller. Roll it over the whole hoodie to lift loose fuzz. This clears the surface so you can see which pills are really attached.
  2. Lay the hoodie flat. Use a firm, flat surface such as a table or ironing board. Do one section at a time: a sleeve, the front, the hood, the pouch.
  3. Pull the fabric taut. Hold the area with your free hand so the fabric is smooth, not bunched. Slack fabric can get caught in the blades.
  4. Turn on the shaver and use light pressure. Move in soft circles or short, slow strokes. Let the tool do the work. Adjust the blade height if your model has that setting, and start on the lightest one.
  5. Empty the lint compartment as you go. A full chamber slows the blades and makes you press harder.
  6. Finish with the lint roller again. It picks up the stray trimmed fibers so they do not resettle in the fabric.

The rule most people break

The temptation is to hold the shaver over a stubborn patch until it is clean. Don't. Wirecutter spoke with Preeti Arya of the Fashion Institute of Technology, who advises keeping the setting light, never pushing hard or lingering in one spot, and using a shaver on a given garment only once or twice a year, because mishandling can cause more pilling. If a spot is still rough after a pass or two, switch to a razor or scissors for those few pills rather than grinding the shaver in.

The same Wirecutter piece says electric shaving suits thick cotton, wool and synthetic fabrics. Thin knits and delicate fabrics call for a manual sweater comb instead. A heavy hoodie sits comfortably in the first group, while a thin knit layer you wear under it may not.

Fabric shaver and sweater comb fabric guidance

No shaver? Use a razor, scissors or tape

You can get a good result with tools you already have. Take more care with each of them, because there is no guard between the blade and your hoodie.

Disposable or safety razor

This works best on sturdy fabrics like cotton and fleece. Lay the hoodie flat, hold the fabric tight and work from top to bottom in slow, light strokes, as The Spruce describes. Keep the razor nearly flat against the surface and never press into the fabric. Rinse the razor or wipe the blade when it fills with fuzz. Stop at seams, ribbed cuffs and any printed area, and do not use a razor on loosely knit pieces.

Small, sharp scissors

Use these for a handful of large pills. Hold the fabric taut and snip each pill close to the surface, with the blades parallel to the fabric rather than pointing in. Never pinch and pull the pill away first, since that can tug a loop of yarn out of the knit. Scissors are too slow for a whole hoodie, but they are ideal for a few spots after a shaver pass.

Lint roller or packing tape

Tape is gentle and works on small, concentrated areas of light pilling. It lifts loose pills and dust, but it will not remove pills that are firmly anchored. Think of it as the first step and the finishing step, not the whole job.

Sweater stone, comb or toothbrush

Patagonia-style advice, as summarized by Maytag, is that a fabric comb is slower but less likely to nick soft knits, and a pumice-like sweater stone's tiny pores pull stubborn pills. Vogue adds that a soft, clean toothbrush brushed in one direction can loosen fuzz on fleece and fuzzy knits. These suit delicate or loose-knit pieces better than a heavy hoodie, but they are good for the fleece lining of a cuff or hood edge where a blade would be awkward.

Spot-by-spot: where hoodies pill and how to handle each

  • Underarms and sides: the most common spot. Lay the sleeve flat and work in short strokes along the seam, not across it.
  • Cuffs and hem: ribbed bands are stretchy and easy to snag. Stretch them lightly over your hand, and use scissors or a toothbrush rather than a shaver.
  • Front pouch: a wide flat area, ideal for a shaver. Keep clear of any print or embroidery.
  • Hood and drawstring area: pills gather where the hood folds. Flatten it fully before you shave.
  • Shoulders: pills from backpack straps. A quick, light shaver pass is usually enough.

Protect prints and graphics

Graphics are the one place to avoid blades. Shaving over a screen print can scuff or lift the ink. Work around the design and use a lint roller on the edges. If you are unsure whether your fabric is cotton, polyester or a mix, our poly cotton versus cotton home tests show how to tell, which helps you pick the right tool. For more on how the cotton itself is made, see ring spun cotton versus regular cotton.

Keep pills from coming back

Removing pills is the repair. Washing and wearing habits are the prevention. The Spruce's laundry advice, in a form you can use on a hoodie:

  1. Turn it inside out. The outside fabric rubs less against the drum and other clothes. The testing explainer cited above also describes washing inside out as an easy way to reduce pilling.
  2. Choose a gentle cycle or hand wash. Less agitation means less fiber loosening.
  3. Sort your laundry. Wash hoodies with other soft items, not with jeans, zippers or anything rough or hooked.
  4. Do not overload the washer. Crowded loads increase rubbing.
  5. Skip bleach and harsh cleaners. They weaken fibers, which then break and pill more readily.
  6. Consider the detergent and rinse. The Spruce notes that detergent with cellulase enzymes breaks down cotton pills, and that fabric softener in the rinse coats fibers and lessens abrasion.
  7. Line-dry or lay flat. A hot dryer adds friction and heat. Air drying is gentler.

We cover the full routine, including how to avoid shrinking, in our guide to washing hoodies the right way. If you ever want to adjust the fit, our hoodie shrinking guide explains how to do it without ruining prints.

Wear habits that help

Rotate hoodies so one favorite does not take all the friction. Avoid wearing a rough bag strap on the same shoulder every day. Keep Velcro, zippers and jewelry away from the fabric, since hooks and edges snag fibers and start pills. A hoodie that gets a day off between wears also recovers shape better.

A quick ten-minute routine

Here is the whole fix in one pass, for a hoodie that has been worn for a season:

  1. Roll a lint roller over everything.
  2. Lay the hoodie flat on a table and check which areas are pilled: underarms, cuffs, pouch.
  3. Run a fabric shaver over flat areas in light circles, one panel at a time, empty the lint chamber, and never stay in one spot.
  4. Snip any remaining large pills with small scissors.
  5. Roll the lint roller over it again.
  6. Wash it inside out on a gentle cycle and let it air dry.

If you pill-shave a hoodie more than once or twice in a year, ease off the shaver and use gentler tools. Frequent shaving is a sign to work on the wash and wear habits instead.

Keep your favorite hoodies looking fresh

At Kenny Wade's World we make casual wear for people who want to look put together without trying too hard. Comfort, style and versatility are what each piece is designed around, and these care steps help every hoodie keep that look. Browse the full line of Kenny Wade clothing when you are ready for your next piece.

Kennywadesworld

If you want ideas for wearing them, see our hoodie outfit ideas and the streetwear hoodie and leather jacket looks.

Our view on hoodie care

We think a hoodie should be the easiest thing you own to wear and the easiest to look after. Clothes you reach for constantly are going to see friction, and a little pilling is just proof they are being lived in.

What matters is what you do next. A lint roller, a light pass with a shaver and a gentler wash take a few minutes, and your hoodie goes back to looking sharp. That is the way we like to think about style: effortless, comfortable and ready for whatever the day brings, from the studio to the street.

Our clothing is built around comfort, style and versatility, so each piece can move between occasions. Take care of it with the habits above and it will keep earning its place in your rotation.

Kenny Wade

FAQ

How do I get rid of pilling on a hoodie?

Lay the hoodie flat, roll a lint roller over it, then glide a fabric shaver over the pills with light pressure while holding the fabric taut. Finish with the lint roller again. A razor or small scissors can handle what is left, as long as you go slowly.

Why do I have so many lint balls on my hoodie after washing?

Washing rubs fibers against each other and the drum, which loosens short fibers that tangle into pills. Heavy loads, rough cycles, bleach and hot dryers make it worse. Washing inside out on a gentle cycle, sorting your laundry and air drying reduce it.

Can I use a razor on my hoodie?

Yes, on sturdy fabrics such as cotton or fleece. Lay the garment flat, hold it taut and use slow, light strokes from top to bottom. Avoid printed areas, ribbed cuffs and loosely knit fabric, where the blade can nick or snag.

How often can I use a fabric shaver?

Expert guidance reported by Wirecutter is once or twice a year on a given garment, with a light setting and no lingering in one spot. If pills return sooner, switch to a lint roller, comb or scissors for touch-ups and adjust how you wash it.

Why does my hoodie leave lint on my shirt?

Loose fibers shed from soft fleece and cotton surfaces, especially in the first washes and when the fabric rubs against another layer. A lint roller clears it. Washing the hoodie inside out and separately from darker or smoother fabrics helps cut down transfer.

Sources